Choosing and Caring for Polishers and Buffing Pads
The compound gets the credit, but the machine and pad do most of the work. Here's how the tools we sell most fit together, and how to look after them.
Products in this guide
Rotary vs. dual-action polishers
Rotary polishers
A rotary spins the pad on a single axis. It cuts fastest and is the right tool for heavy oxidation on gelcoat; STARKE, for example, says to correct oxidation only with a rotary. The Makita 9237C Rotary Buffer is a shop standard. The DeWalt DWP849X Rotary Polisher is another popular choice.
Makita 9237C speed dial (trigger fully pulled):
| Dial | RPM |
|---|---|
| 1 | 600 |
| 2 | 900 |
| 3 | 1,500 |
| 4 | 2,100 |
| 5 | 2,700 |
| 6 | 3,200 |
- Makita's manual says to hold the pad at about 15° to the surface with only slight pressure, and always wear safety glasses or a face shield.
- Don't run it at low speed continuously for long periods; that overloads the motor.
- Match the speed to your compound's directions. For example, STARKE Level R starts around 800 RPM and finishes around 1200–1400.
Dual-action (random orbital) polishers
A dual-action machine spins and orbits at the same time, so it's more forgiving and leaves fewer holograms. It's the usual choice for finishing polishes, ceramic prep and applying sealants. The RUPES LHR21 Mark V has a large 21 mm orbit and a 6" backing plate (Rupes LHR 21 6" Backing Plate), with electronic speed control.
Choosing a pad
Wool: most cut
- White wool is the heavy-cut choice on a rotary, such as the STARKE Step 1 White Wool Heavy Cut Pad.
- Yellow wool is a step finer, such as the STARKE Step 2 Yellow Wool Polishing Pad.
- The Buff and Shine Double Sided Cutting Wool Pad is another heavy-cut wool option for rotaries.
- For dual-action machines, use DA-specific wool such as the RUPES BigFoot Blue DA Wool Coarse Pad.
Foamed wool: cut with less mess
Lake Country's foamed wool, such as the Lake Country Purple Foamed Wool Pad and Lake Country HD Blue Synthetic Foamed Wool Pad, bonds the base of the wool fibers with foam, so it sheds less than standard wool.
Foam: polishing and finishing
- Lake Country HDO pads are designed specifically for long-throw dual-action polishers: Blue for heavy polishing (Lake Country HDO Blue Heavy Polish Pad), Orange for polishing (Lake Country HDO Orange Polishing Pad) and Black for finishing.
- Buff and Shine URO-TEC foam pads come in a full range from the aggressive Coarse Blue, which is stable on long-throw DAs, down to Black for final finishing.
- RUPES foam is color-coded too, from the Rupes Blue Coarse Foam Pad to the Rupes Yellow Polishing Foam Pad.
Microfiber: fast cut, great for one-step work
Microfiber pads, like the Buff and Shine Microfiber Polishing Pad, cut quickly and are popular for one-step polishing. STARKE also names a Buff and Shine microfiber pad for applying Starke Hyper Hold Pro.
Keeping pads working
- Clean wool pads often while you work with a pad spur, such as the Buff and Shine Pad Spur. Don't use a screwdriver.
- Keep compounding pads and polishing pads separate so you don't carry heavy abrasive into your finishing step.
- Foam pads: never use a pressure washer or high-pressure air. Soak in warm water and wring them out, or machine wash on a gentle cold or warm cycle, about 10 pads per load. Air dry; never put them in a dryer.
- Knitted wool: brush or spur off dried residue, wash gently and air dry. Water can slightly change wool.
- Tufted wool: clean regularly with a metal spur. Air dry.
- Microfiber pads: compressed air is fine (wear a dust mask and eye protection). Lake Country recommends its Lake Country Pad Washer 4000 for washing them. Air dry.
Matching the system
A typical gelcoat restoration runs from most aggressive to least: Starke Level R Heavy Cut Compound on white wool with a rotary, then Starke Elevate Medium Cut Compound on yellow wool, then Starke Triple P Ceramic Prep Polish on a STARKE Yellow $ Money Pad with a DA before coating. See each product's guide for the exact steps.
Safety
- Always wear safety glasses or a face shield when polishing.
- Keep the cord clear of the pad, and unplug the machine before changing pads or backing plates.
Watch it done
Questions before you start? Call or stop by Marine Detail Supply Company Fort Lauderdale, 2821 SW 23rd Terrace, Unit 1, just off SR 84 near Marina Mile. Open Mon–Fri, 8am–4pm. (754) 732-1937. Orders over $200 ship free in the domestic US.






